Sound insulation measurements may be performed in various configurations.

Simultaneous Measurement in Sending- and Receiving Room

The simultaneous measurement configuration reduces the measurement uncertainty; the noise level is measured in both rooms at the same time.

These are the recommended configurations:

Automated Simultaneous Measurement
(configuration is remotely controlled by one person)

• 1x Dodecahedron Speaker Set
• 2x XL2 Sound Level Meter
• 2x M2230 Measurement Microphone
• 2x Extended Acoustic Pack
• 2x Sound Insulation Option
• 2x Remote Measurement Option
• 2x ASD Cable 5m (alternatively 10m or 20m)
• 2x Mains Power Adapter XL2
• 2x Exel System Case
• 1x Windows Computer, Laptop or Tablet (to start/stop measurements live in Sound Insulation Reporter)
• 1x Wi-Fi Access Point (generating Wi-Fi network, e.g. SILEX SX-ND-4350 WAN) or USB Device Server (using existing Wi-Fi network); available at your preferred supplier

Manual Simultaneous Measurement 
(measurements are performed by two persons - one in each room; all measurement data is loaded into Sound Insulation Reporter software after completed measurement)

• 1x Dodecahedron Speaker Set
• 2x XL2 Sound Level Meter
• 2x M2230 Measurement Microphone
• 2x Extended Acoustic Pack
• 2x Sound Insulation Option
• 2x ASD Cable 5m (alternatively 10m or 20m)
• 2x Mains Power Adapter XL2
• 2x Exel System Case
• 1x Windows Computer, Laptop or Tablet (to analyze data in Sound Insulation Reporter after completed measurements)

Sequential Measurement of Sending- and Receiving Room

The Dodecahedron Speaker Set provides the test signal at continuous sound pressure level for long time; e.g. 1 hour. This supports precise sound insulation readings at measuring the sending and receiving room sequentially. These are the recommended configurations:

Automated Sequential Measurement 
(configuration is remotely controlled by one person)

• 1x Dodecahedron Speaker Set
• 1x XL2 Sound Level Meter
• 1x M2230 Measurement Microphone
• 1x Extended Acoustic Pack
• 1x Sound Insulation Option
• 1x Remote Measurement Option
• 1x ASD Cable 5m (alternatively 10m or 20m)
• 1x Mains Power Adapter XL2
• 1x Exel System Case
• 1x Windows Computer, Laptop or Tablet (to start/stop measurements live in Sound Insulation Reporter)
• 1x Wi-Fi Access Point (generating Wi-Fi network, e.g. SILEX SX-ND-4350 WAN) or USB Device Server (using existing Wi-Fi network); available at your preferred supplier

Manual Sequential Measurement
(measurements are performed by one person; all measurement data is loaded into Sound Insulation Reporter software after completed measurement)

• 1x Dodecahedron Speaker Set
• 1x XL2 Sound Level Meter
• 1x M2230 Measurement Microphone
• 1x Extended Acoustic Pack
• 1x Sound Insulation Option
• 1x ASD Cable 5m (alternatively 10m or 20m)
• 1x Mains Power Adapter XL2
• 1x Exel System Case
• 1x Windows Computer, Laptop or Tablet (to analyze data in Sound Insulation Reporter after completed measurements)