Can the XL2 also measure impedances of my distributed audio lines?
Beste Antwort
G
Gregor Schmidle
gesagt
etwa 5 Jahre her
Hello Frank,
the XL2 does not provide impedance measurements of distributed audio lines. The right tool for this is the MR-PRO audio generator. Please have a look at our website https://www.nti-audio.com/en/products/minirator-mr-pro-mr2 for further information.
the XL2 does not provide impedance measurements of distributed audio lines. The right tool for this is the MR-PRO audio generator. Please have a look at our website https://www.nti-audio.com/en/products/minirator-mr-pro-mr2 for further information.
Best Regards,
Greg
Gregor Schmidle
NTi Audio
1 Person gefällt das
N
Nguyen Hai Son
gesagt
über 3 Jahre her
Hello Mr. Gregor,
Could you please give me some sample how to measure impedance of loudspeaker line of PAGA system by using MR-PRO? I have one with full accessories e.g. 70 V / 100 V Protective Adapter for MR-PRO
Thank you in advance!
Son.NH
Gregor Schmidle
gesagt
über 3 Jahre her
Hello Mr. Son,
there are several ressources available that discus this topic:
Frank Staller
Can the XL2 also measure impedances of my distributed audio lines?
Hello Frank,
the XL2 does not provide impedance measurements of distributed audio lines. The right tool for this is the MR-PRO audio generator. Please have a look at our website https://www.nti-audio.com/en/products/minirator-mr-pro-mr2 for further information.
Best Regards,
Greg
Gregor Schmidle
NTi Audio
- Älteste zuerst
- Beliebt
- Neueste zuerst
Sorted by Älteste zuerstGregor Schmidle
Hello Frank,
the XL2 does not provide impedance measurements of distributed audio lines. The right tool for this is the MR-PRO audio generator. Please have a look at our website https://www.nti-audio.com/en/products/minirator-mr-pro-mr2 for further information.
Best Regards,
Greg
Gregor Schmidle
NTi Audio
1 Person gefällt das
Nguyen Hai Son
Hello Mr. Gregor,
Could you please give me some sample how to measure impedance of loudspeaker line of PAGA system by using MR-PRO? I have one with full accessories e.g. 70 V / 100 V Protective Adapter for MR-PRO
Thank you in advance!
Son.NH
Gregor Schmidle
Hello Mr. Son,
there are several ressources available that discus this topic:
See our "Impedance Meter" Website
https://www.nti-audio.com/en/applications/evacuation-systems/impedance-meter
See the chapter "How to Test 100V Systems" on page 5 in our Quickguide "How to Commission an Installed Sound Environment"
https://www.nti-audio.com/Portals/0/data/en/NTi-Audio-QuickGuide-Installed-Sound.pdf
See our Webinar recording "Testing of Distributed Audio Systems"
https://www.nti-audio.com/en/support/webinars-on-demand#Testing-Distributed-Audio-System
I hope this helps.
Best Regards,
Gregor
NTi Audio
Ephry David
Gregor Schmidle
Hello David,
as a minimum system, you'd need:
Please contact me at g.schmidle@nti-audio.com for further information.
Best Regards,
Gregor